Building regulations exemption for temporary buildings
Some temporary buildings under certain circumstances may be exempt from parts of the buildings regulations.
Schedule 2 of the building regulations ‘Exempt Buildings and Work’ defines a temporary building as, Class 4, ‘A building that is not intended to remain where it is erected for more than 28 days’.
However, this definition is deceptively simple, and the application of and exemption from different parts of the building regulations are very complicated, and expressed in a way that is not very helpful.
Regulation 9 explains that:
Subject to paragraphs 2 and 3 (see below) and regulation 21(1) (energy efficiency requirements), the regulations do not apply to:
- the erection of any building or extension of a kind described in Schedule 2 (exempt buildings, Class 4 of which are temporary buildings); or
- the carrying out of any work to or in connection with such a building or extension, if after the carrying out of that work it is still a building or extension of a kind described in that Schedule.
Paragraph 2 states that the requirements of paragraphs G1 and G3(2) and (3) of Schedule 1 (relating to sanitation, hot water safety and water efficiency) apply:
- To any greenhouse which receives a cold or hot water supply from a source shared with or located inside a dwelling; and
- Small detached building falling within class 6 in Schedule 2 (small detached buildings); and
- Any extension of a building falling within class 7 in Schedule 2 (extensions),
which in either case receives a cold or hot water supply from a source shared with or located inside any building other than a building or extension of a kind described in Schedule 2.
Paragraph 3 states that the requirements of Part P of Schedule 1 (electrical safety) apply to:
- Any greenhouse;
- Any small detached building falling within class 6 in Schedule 2 (small detached buildings); and
- Any extension of a building falling within class 7 in Schedule 2 (extensions),
which in any case receives its electricity from a source shared with or located inside a dwelling.
Paragraph 21(1) states that energy efficiency requirements apply to:
- The erection of any building of a kind falling within this paragraph;
- The extension of any such building, other than an extension to which paragraph (4) applies; and
- The carrying out of any work to or in connection with any such building or extension.
A building falls within paragraph 21 (1) if it:
- Is a roofed construction having walls;
- Uses energy to condition the indoor climate; and
- Does not fall within one or more of the categories in paragraph (3) (listed below):
- Listed buildings, building in a conservation area and scheduled monuments where compliance with the energy efficiency requirements would unacceptably alter their character or appearance;
- Buildings which are used primarily or solely as places of worship;
- Temporary buildings with a planned time of use of two years or less, industrial sites, workshops and non-residential agricultural buildings with low energy demand;
- Stand-alone buildings other than dwellings with a total useful floor area of less than 50m2.
The planning portal provides a useful summary of this information, however, it may be wise to consult the building control body to establish precise application of, and exemption from the building regulations for temporary buildings.
See also: Building regulations exemptions.
[edit] Related articles on Designing Buildings Wiki
- Approved documents.
- Building regulations.
- Building regulations exemptions.
- Expo 2020 Dubai.
- Licensing.
- Live event production.
- Modular buildings.
- Permitted development.
- Planning permission.
- Temporary building.
- Temporary demountable structures.
- Temporary use.
- The history of fabric structures.
- WikiHouse.
Featured articles and news
Twas the site before Christmas...
A rhyme for the industry and a thankyou to our supporters.
Plumbing and heating systems in schools
New apprentice pay rates coming into effect in the new year
Addressing the impact of recent national minimum wage changes.
EBSSA support for the new industry competence structure
The Engineering and Building Services Skills Authority, in working group 2.
Notes from BSRIA Sustainable Futures briefing
From carbon down to the all important customer: Redefining Retrofit for Net Zero Living.
Principal Designer: A New Opportunity for Architects
ACA launches a Principal Designer Register for architects.
A new government plan for housing and nature recovery
Exploring a new housing and infrastructure nature recovery framework.
Leveraging technology to enhance prospects for students
A case study on the significance of the Autodesk Revit certification.
Fundamental Review of Building Regulations Guidance
Announced during commons debate on the Grenfell Inquiry Phase 2 report.
CIAT responds to the updated National Planning Policy Framework
With key changes in the revised NPPF outlined.
Councils and communities highlighted for delivery of common-sense housing in planning overhaul
As government follows up with mandatory housing targets.
CIOB photographic competition final images revealed
Art of Building produces stunning images for another year.
HSE prosecutes company for putting workers at risk
Roofing company fined and its director sentenced.
Strategic restructure to transform industry competence
EBSSA becomes part of a new industry competence structure.
Major overhaul of planning committees proposed by government
Planning decisions set to be fast-tracked to tackle the housing crisis.
Industry Competence Steering Group restructure
ICSG transitions to the Industry Competence Committee (ICC) under the Building Safety Regulator (BSR).
Principal Contractor Competency Certification Scheme
CIOB PCCCS competence framework for Principal Contractors.
The CIAT Principal Designer register
Issues explained via a series of FAQs.